2.Use shims of the hinge mounting area to adjust the vehicle laterally. The types (thickness) of shims are specified as follows.
Shim thickness (A): t 0.5 mm, t 1.0 mm, t 2.9 mm
|
1.When the gap between the
back door and body is not even, loosen the hinge mounting
bolt, and adjust by moving the back door horizontally and
vertically. 2.Use shims of the hinge mounting area to adjust the vehicle laterally. The types (thickness) of shims are specified as follows. Shim thickness (A): t 0.5 mm, t 1.0 mm, t 2.9 mm |
 |
3.If the striker is not
engaged with the latch properly, loosen the striker mounting
screws (torx), and adjust by moving the striker horizontally
and vertically. 4.Use shims of the striker mounting area to adjust the vehicle laterally. |