REMOVAL AND INSTALLATION


Pre-removal operation
  • Door trim assembly removal (Refer to GROUP 52A - Door Trim .)

 Post-installation operation
  • Door inside handle play check (Refer to .)
  • Door outside handle play check (Refer to .)
  • Door trim assembly installation (Refer to GROUP 52A - Door Trim .)





Door inside handle removal

>>C<<
 1.
 Door inside handle



Door lock key cylinder and door outside handle removal steps


·
 Waterproof film (Refer to .)


2.
 Door outside handle


3.
 Door lock key cylinder <driver’s seat only>



Door handle and door latch removal steps


·
 Waterproof film (Refer to .)

>>B<<
 4.
 Rear lower sash


5.
 Screw


6.
 Door latch assembly


7.
 Inside handle rod


8.
 Inside lock cable <front door>, Inside lock rod <rear door>



Door check removal steps


·
 Front door speaker (Refer to GROUP 54A - Speaker .)

>>A<<
 9.
 Door check

INSTALLATION SERVICE POINTS

>>A<< DOOR CHECK INSTALLATION

Install the door check with the following identification marks facing upward.
Application
 Identification mark
Front door
Left door
 20L
Right door
 20R
Rear door
 Left door
 26L
Right door
 26R

>>B<< REAR LOWER SASH INSTALLATION
Securely insert the rear lower sash into the window rear sash.

>>C<< DOOR INSIDE HANDLE INSTALLATION

1.Install the inside lock cable to the door inside handle as follows:
(1) Install the inner cable end in the inside lock cable to the clip in the door inside handle.
(2) Turn the inside lock knob to the door lock position.
(3) Install the outer cable end to the door inside handle securely.
(4) Install the clip to the inner cable.
2.Install the inside handle rod to the door inside handle.
3.Install the door inside handle to the door.