![](../../../img/42/AC607146AC00ENG.png)
|
1.Remove the sunroof fuse
from the fuse box, and then connect a circuit tester as
shown. 2.Operate the sunroof switch to open the
sunroof. Measure when the sunroof is half
opened. Standard value: 7 A or less (at 20
°C) 3.Check the following areas if
the operating current of the sunroof lid glass exceeds the
standard value.
- Improperly installed sunroof assembly, deformation
or any foreign substances
- Drive cable fastening
- Tilting of sunroof lid glass
|