INSPECTION PROCEDURE A-3: Sunroof Anti-trap Function does not work Normally.
caution
Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the sunroof anti-trap function does not work, the sunroof motor assembly (sunroof-ECU) may be defective.
POSSIBLE CAUSES
Malfunction of the sunroof motor assembly (sunroof-ECU)
DIAGNOSTIC PROCEDURE
Retest the system.
Check the sunroof trouble symptom according to the following procedures.
(1)Carry out the learning procedures of the sunroof fully closed position (Refer to ).
(2)Check the trouble symptom.
Q.
Is the check result normal?
The trouble can be an intermittent malfunction (Refer to GROUP 00, How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction ).