REMOVAL AND INSTALLATION

Removal steps · Rear combination lamp (Refer to GROUP 54A, Rear combination lamp .) <<A>> · Rear overfender rear part · Rear mud guard (Refer to .) · Corner sensor connector connection 1. Rear centre bumper assembly 2. Rear bumper step 3. Rear centre bumper <<A>> 4. Rear corner bumper 5. Rear bumper reinforcement <<B>> >>A<< 6. Rivet A 7. Rear bumper face side bracket <<B>> >>A<< 8. Rivet B 9. Rear mud guard support 10. Rear bumper side retainer 11. Rear bumper under cover 12. Reflector 13. Corner sensor

Removal steps · Rear combination lamp (Refer to GROUP 54A, Rear combination lamp .) <<A>> · Rear overfender rear part · Rear mud guard (Refer to .) · Corner sensor connector connection 1. Rear centre bumper assembly 2. Rear bumper step 3. Rear centre bumper <<A>> 4. Rear corner bumper 5. Rear bumper reinforcement <<B>> >>A<< 6. Rivet A 7. Rear bumper face side bracket <<B>> >>A<< 8. Rivet B 9. Rear mud guard support 10. Rear bumper under cover 11. Rear bumper side bracket lower 12. Reflector 13. Corner sensor 14. Rear bumper face support bracket

caution To prevent the overfender from damage, pull it gradually and do not over-pull it. Before removing the rear corner bumper, release the rear part of the overfender by pulling and uncliping it outwards. This makes the rear corner bumper removal possible without removing the entire overfender.

Refer to the Disassembly Service Point for FRONT BUMPER ().

Refer to the Reassembly Service Point for FRONT BUMPER ().