REMOVAL AND INSTALLATION

		Rear wiper blade removal steps
	1.	Rear wiper blade assembly
>>A<<	2.	Rear wiper blade
		Rear wiper motor removal steps
	·	Back door trim (Refer to GROUP 52A, Back door Trim )
	3.	Cover
>>C<<	4.	Rear wiper arm and blade assembly
>>B<<	5.	Grommet
	6.	Rear wiper motor assembly
		Rear washer tank and rear washer motor removal steps
	·	Back door trim (Refer to GROUP 52A, Back door Trim )
	·	Rear washer motor connector connection
	7.	Rear washer tank assembly
	8.	Rear washer motor
		Rear washer nozzle and hose removal steps
	·	Back door trim (Refer to GROUP 52A, Back door Trim )
	9.	Rear washer nozzle
	10.	Rear washer hose

note

For removal and installation of the wiper and washer switch, refer to GROUP 54A, Column switch

INSTALLATION SERVICE POINTS

caution

Use a curved backing like that shown for the backing of a wiper blade to ensure sustained wiper wiping performance.

Install so that the mating mark on the grommet (triangle) is aligned with the mark (circle) on the back door glass.

Install so that the end of the wiper blade stops at the specified position.
Standard value (A): Align wiper blade with defogger lower line.