|
If the rear wiper does not stop normally within
the predetermined range, the rear wiper motor or the ETACS-ECU may be
defective.
|
|
- Malfunction of the rear wiper motor
- Malfunction of the ETACS-ECU
- Damaged harness wires and connectors
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Replace the rear wiper motor.
|
|
|
|
(1)Disconnect the connector, and measure at the wiring
harness side.
|
|
(3)Check the voltage between G-03 rear wiper motor connector
terminal No.4 and body earth OK: Battery voltage
|
|
Q.
Is the check result normal?
|
|
- Check the power supply line for open or short circuit.
|
|
Q.
Is the check result normal?
|
|
The
trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|
|
Repair
the wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
- Check the power supply line for open or short circuit.
|
|
Q.
Is the check result normal?
|
|
Repair
the wiring harness.
|
|
|
|
Check that the rear wiper auto stop function
works normally.
|
|
Q.
Is the check result normal?
|
|
The
trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|