REMOVAL AND INSTALLATION


caution Before removing the front seat assembly, refer to GROUP 52B, Service Precautions and side and Curtain Air Bag Module .




Front seat assembly removal steps


1.
 Heated seat switch <Vehicle with heated seat>


2.
 Headrestraint
<<A>>
3.
 Front seat anchor cover

>>A<<
 4.
 Front seat assembly

REMOVAL SERVICE POINT

<<A>> WIRING HARNESS CONNECTOR DISCONNECTION

Disconnect the following wiring harness connectors:
Connector
 Connector name
a
 Seat belt switch connector
b
 Power seat connector <Vehicle with power seat>
c
 Heated seat connector <Vehicle with heated seat>
d
 Side air bag connector <Vehicles with side air bag>

INSTALLATION SERVICE POINT

>>A<< FRONT SEAT ASSEMBLY INSTALLATION


  1. Confirm that both the seat slides are locked, and then temporarily tighten all the bolts shown in the figure so that no load is applied to the front seat cushion.
  2. Tighten all the bolts to the specified torque.

    Bolts: 41 ± 10 N·m