GENERAL INFORMATION
- The Supplemental Restraint System (SRS) and seat belt with
pre-tensioner is designed to supplement the driver’s and
front passenger’s seat belts to help reduce the risk or
severity of injury to the driver and front passenger by
activating and deploying both front air bags in certain frontal
collisions.
- The SRS and seat belt pre-tensioner systems consist of air bag
modules, SRS-ECU, front impact sensors, side impact sensors, SRS
warning lamp, clock spring and seat belt pre-tensioner. Air bag
modules are installed at the centre of the steering wheel, on
the globe box, front seatback and the roof-side area. Each air
bag has a safing folded air bag and an inflator. SRS-ECU,
installed at the depths of the centre console, monitors the
system. The front impact sensor is assembled in the radiator
support panel to monitor collision upon frontal impact. The side
impact sensor is assembled in the centre pillar and quarter
panel lower to monitor collision upon side impact. The warning
lamp on the instrument panel indicates the operational status of
the SRS. The clock spring is installed in the steering column.
The seat belt pre-tensioner is incorporated in the seat belt
retractor.
- Dual stage air bag system has been adopted to both driver and
front passenger sides. This is consisted of the front impact
sensor, SRS-ECU and dual stage inflator. Air bag is deployed in
two stages according to the strength of impact
received.
- Only authorized service personnel should do work on or around
the SRS components. Those service personnel should read this
manual carefully before starting any such work.
![](../../../img/52/AC608311AB00ENG.png)