If heat damage may occur during paint work, remove the SRS-ECU, the air bag modules, the clock spring, front seats, impact sensors and the seat belt with pre-tensioner.
SRS-ECU, air bag modules, clock spring and impact sensors: 93° C or more
Seat belt with pre-tensioner: 90°C or more
If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.
If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting etc., follow the service procedures that follow. (SRS-ECU; refer to , Driver’s and passenger’s (front) air bag modules and clock spring; refer to , Side and curtain air bag modules; refer to ,Front impact sensor; refer to , Side impact sensors; refer to , Seat belt with pre-tensioner; refer to ).
