|
| warning |
- If any improper part is found during the
following inspection, replace the front
seatback frame with a new one. Dispose
of the old one according to the
specified procedure (Refer to
 ).
- Never attempt to measure the circuit
resistance of the air bag module (squib)
even if you are using the specified
tester. If the circuit resistance is
measured with a tester, accidental air
bag deployment will result in serious
personal injury.
|
1.Check the air bag module deployment section
for dents or deformation.
2.Check connector for
damage, terminals for deformation, and harness for
binds.
|
|
| warning |
- If any improper part is found during the
following inspection, replace the
curtain air bag module (squib) assembly
with a new one. Dispose of the old one
according to the specified procedure
(Refer to ).
- Never attempt to measure the circuit
resistance of the air bag module (squib)
even if you are using the specified
tester. If the circuit resistance is
measured with a tester, accidental air
bag deployment will result in serious
personal injury.
|
1.Check that the curtain air bag deployment
part of the headlining is normal.
2.Check the
inflator surface for cracks, dents or
deformations.
3.Check the air bag for
breakage.
4.Check the connector for damage, the
terminal for deformation and the harness for
binding.
|