Code No.B1509: Incorrect SRS-ECU
caution |
If diagnosis code B1509 is set in the SRS-ECU, always diagnose the CAN main bus line.
|
DIAGNOSIS CODE SET CONDITIONS
This code is set when the vehicle specification does not meet the ECU specification.
PROBABLE CAUSES
- Malfunction of the SRS-ECU
- Mismatch between vehicle and SRS-ECU specifications
|
STEP 1. M.U.T.-III CAN bus diagnostics.
|
|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair the CAN bus line (Refer to GROUP 54D, Diagnosis ).
|
|
|
|
STEP 2. Check whether the diagnosis code is reset.
|
|
Check again if the diagnosis code is set.
|
|
(1)Erase the diagnosis code.
|
|
(2)Ignition: "LOCK" (OFF) position to "ON"
|
|
(3)On completion, check that the diagnosis code is not reset.
|
|
Q.
Is the diagnosis code B1509 set?
|
|
Replace the SRS-ECU (Refer to ).
|
|
|
|
There is an intermittent malfunction such as poor engaged connector(s) or open circuit (Refer to GROUP 00, How to Cope with Intermittent Malfunction ).
|
|
|