Tool
|
Number
|
Name
|
Use
|
|
MB990784
|
Ornament
remover
|
Removal of
switch
|
|
MB991955
- MB991824
- MB991827
- MB991910
- MB991911
- MB991825
- MB991826
|
M.U.T.-III
sub-assembly
- Vehicle Communication Interface
(V.C.I.)
- M.U.T.-III USB cable
- M.U.T.-III main harness A (Vehicles with
CAN communication system)
- M.U.T.-III main harness B (Vehicles without
CAN communication system)
- M.U.T.-III measure adapter
- M.U.T.-III trigger harness
|
caution |
M.U.T.-III main harness A
(MB991910) should be used. M.U.T.-III main
harness B should not be used for this
vehicle.
|
SWS communication line check (ECU check and service
data)
|
|
MB992006
|
Extra fine
probe
|
Continuity check
and voltage measurement at harness wire or
connector
|
|
MB991960
|
Intermediate wiring
harness for SWS customisation
|
SWS communication
line check (ECU check, service data)
|
|
MB991223
- MB991219
- MB991220
- MB991221
- MB991222
|
Harness
set
- Check harness
- LED harness
- LED harness adapter
- Probe
|
Continuity check
and voltage measurement at harness wire or
connector
- For checking connector pin contact
pressure
- For checking power supply circuit
- For checking power supply circuit
- For connecting a locally sourced
tester
|
|
MB991813
- MB991806
- MB991812
- MB991822
|
SWS monitor
kit
- SWS monitor cartridge
- SWS monitor harness (for
column-ECU)
- Probe harness
|
SWS communication
line check (ECU check and service data)
|
|
MB991529
|
Diagnosis code
check harness
|
- Input signal check by using a voltmeter
- Diagnosis code reading
- Levelling motor drive test
|