|
With the ignition switch at the ACC
position and the audio power OFF, press the button in the
following order.
- Press the [CH1] button.
- Press the fast rewind button.
- Press the fast forward button.
- Press the [CH6] button.
note |
To start the speaker check
mode, perform the button operations above within
60 seconds since turning OFF the audio
power.
|
|
|
With the speaker connection check
mode, the connection status of each speaker can be checked
based on the sound output from each speaker. The procedure
is as follows.
|
|
1.At the same time with the
start of speaker check mode, the sound for speaker
connection check is output from the front door speaker (LH).
Check the speaker connection of front door speaker (LH)
based on this sound output. 2.Press the
[CH6] button to switch the sound output for
speaker check from the front door speaker (LH) to the front
door speaker (RH). Check the speaker connection of front
door speaker (RH) based on the output of speaker connection
check sound from the front door speaker
(RH). 3.Press the [CH6] button again
to switch the sound output for speaker check from the front
door speaker (RH) to the rear door speaker (LH). Check the
speaker connection of rear door speaker (LH) based on the
output of speaker connection check sound from the rear door
speaker (LH). 4.Press the [CH6] button
again to switch the sound output for speaker check from the
rear door speaker (LH) to the rear door speaker (RH). Check
the speaker connection of rear door speaker (RH) based on
the output of speaker connection check sound from the rear
door speaker (RH).
|
|
Inserting a CD during the speaker
connection check mode shifts the mode to the chattering
check mode, and the chattering sound of each speaker can be
checked.
|
|
As with the speaker connection
check mode, press the [CH6] button to switch the
output speaker of the chattering check sound.
|
|
Check that the chattering sound is
output from the output speaker of chattering check
sound.
|