|
Input signal from the driver’s door
switch is used to operate the functions below. If the signal is abnormal,
these functions will not work normally.
|
|
- Lamp reminder function
- Headlamp automatic-shutdown function
- Room lamps
|
|
- Malfunction of the door switch (front: RH)
- Malfunction of the ETACS-ECU
- Damaged harness wires and connectors
|
|
Check that the door switch (front: RH) is
installed on the body correctly.
|
|
Q.
Is the check result normal?
|
|
Correct the installation
condition.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair
the defective connector.
|
|
|
|
Refer to GROUP 42 - Door Assembly .
|
|
Q.
Is the check result normal?
|
|
Replace the door switch (front:
RH).
|
|
|
|
Q.
Is the check result normal?
|
|
Repair
the defective connector.
|
|
|
|
- Check the input line for open circuit.
|
|
Q.
Is the check result normal?
|
|
Repair
the wiring harness.
|
|
|
|
Check that the door switch (front: RH) signal
is received normally.
|
|
Q.
Is the check result normal?
|
|
The
trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to use troubleshooting/Inspection Service Points ).
|
|
|