PULSE CHECK

1.The input signals (signals other than SWS communication line signals), which are compatible with the SWS monitor by using the M.U.T.-III MB991958 (M.U.T.-III Sub Assembly) or voltmeter, can be confirmed by the Pulse Check.
2.Use the M.U.T.-III MB991958 (M.U.T.-III Sub Assembly) or voltmeter to check the following input signals.

note

If a problem is found in the Pulse Check, refer to the Problems during Input Signal Chart (Refer to

Switches and their conditions, which are applicable for Pulse Check

Input signal	Requirements for sounding buzzer
Keyless entry transmitter	When the switch is turned from off to on
Interior light loaded signal	Illuminates the interior lights