caution | Whenever the ECU is replaced, ensure that
the input and output signal circuits are normal. |
note | <L.H. drive vehicles> Prior to
the wiring harness inspection, check intermediate connector
D-133 <door switch (front: LH)>, D-132 <door
switch (front: LH)>, D-234 <door switch (front:
LH), door switch (rear: LH)>, D-114 <door switch
(front: RH)>, D-115 <door switch (front: RH)>,
D-219 <door switch (front: RH), door switch (rear:
RH)>, E-42 <door switch (rear: LH)>, E-43
<door switch (rear: RH)>, joint connector D-34,
junction block connector D-410, and repair if
necessary. |
note | <R.H. drive vehicles> Prior to
the wiring harness inspection, check intermediate connector
D-133 <door switch (front: LH)>, D-132 <door
switch (front: LH)>, D-234 <door switch (front:
LH), door switch (rear: LH)>, D-114 <door switch
(front: RH)>, D-115 <door switch (front: RH)>,
D-221 <door switch (front: RH)>, E-42 <door
switch (rear: LH)>, E-43 <door switch (rear:
RH)>, joint connector D-34 <except for door switch
(rear: RH)>, junction block connector D-410 <except
for door switch (rear: RH)>, junction block connector
D-422 <door switch (rear: RH)>, and repair if
necessary. |