DISASSEMBLY AND ASSEMBLY

		Disassembly steps
>>C<<	·	Air gap adjustment
	1.	Bolt
	2.	Armature
>>B<<	3.	Snap ring
	4.	Rotor
	5.	Snap ring
>>A<<	6	A/C compressor coil
	7.	Shim
	8.	A/C compressor
	9.	Harness

REASSEMBLY SERVICE POINTS

>>A<< A/C COMPRESSOR COIL INSTALLATION

Install the A/C compressor coil while aligning the pin hole of A/C compressor itself with the protrusion of A/C compressor coil.

>>B<< SNAP RING INSTALLATION

Be careful not to expand the snap ring excessively. If the inside diameter of the snap ring exceeds 30.5 mm due to excessive expansion, replace it.

>>C<<AIR GAP ADJUSTMENT

Apply battery voltage to the magnetic clutch, and check that the clutch air gap is within the standard value. If not within the standard value, use a washer to adjust the air gap.
Standard value: 0.35 - 0.60 mm