|
1.Disconnect the vacuum
hoses (white stripes, yellow stripes) from the solenoid
valve.
2.Disconnect the harness
connector.
|
|
3.Connect a manual vacuum
pump to the nipple A.
|
|
4.Check air-tightness by
applying a vacuum with voltage applied directly from the
battery to the solenoid valve terminal and without applying
voltage.
|
|
Battery
voltage
|
Nipple
B
|
Vacuum
condition
|
Applied
|
Open
|
Vacuum leaks from
nipple B
|
Blocked with
finger*1
|
Vacuum is
maintained
|
Not applied
|
Open
|
Vacuum is
maintained
|
Blocked with
finger*2
|
|
| note |
In case of
mark*1, a vacuum can be felt
but in case of mark*2, a vacuum
cannot be felt.
|
|
|
5.Measure the resistance of
the solenoid valve.
Standard value:
Approximately 40Ω
6.When
disconnecting the vacuum hose, always make a mark so that
the hose can be reconnected at original position.
|