).| 1.Before inspection, set the
vehicle to the pre-inspection condition. |
| 2.Turn the ignition switch
to the "LOCK" (OFF) position and then connect the M.U.T.-III
to the diagnosis connector (Refer to GROUP 00 -
Precautions Before Service, M.U.T.-III ). |
 |
3.Disconnect the ventilation
hose from the positive crankcase ventilation (PCV) valve,
and
connect a vacuum gauge to the ventilation
hose. 4.Plug the PCV valve. 5.Start the engine and check that idle speed is within the standard value. Standard value: 720 ± 100 r/min 6.Check the intake manifold vacuum. Limit: Minimum 60 kPa 7.Turn the ignition switch to the "LOCK" (OFF) position. 8.Disconnect the vacuum gauge and then connect the ventilation hose. 9.Disconnect the M.U.T.-III. |