REMOVAL AND INSTALLATION

Removal steps 1. Engine oil control valve connector connection >>A<< 2. Engine oil control valve >>A<< 3. O-ring

1. caution Never re-use the O-ring. Before installing O-ring, wind sealing tape around the oil passages cut-out area of engine oil control valve, to prevent damage. If the O-ring is damaged, it can cause an oil leak. Apply an adequate and minimum amount of engine oil to the O-ring and then install it to the engine oil control valve. 2.Install the engine oil control valve to the cylinder head. 3.Tighten the engine oil control valve. Tightening torque: 11 ± 1 N·m