![](../../../img/11/AK300583AB00ENG.png)
|
Attach the special tool Lash
adjuster holder (MD998443) to retain the lash adjusters
during
removal operation.
|
![](../../../img/11/AK300584AB00ENG.png)
|
Install the lash adjuster into the
rocker arm, being careful not to spill the diesel fuel
it contains. Retain the installed lash adjuster with the
special tool Lash adjuster holder (MD998443).
|
![](../../../img/11/AK304392AB00ENG.png)
|
1.Install the rocker arm
shaft by loosely fastening the bolts such that any of the
inlet
rocker arms does not push the valve. 2.Fit each
rocker shaft spring from above and make it at right angles
to the plug guide.
note |
Install the rocker shaft
springs before installing the exhaust valve
rocker arms and rocker
arm shaft.
|
|
![](../../../img/11/AK304393AB00ENG.png)
|
3.Remove the special tool
Lash adjuster holder (MD998443) retaining each lash
adjuster. 4.Make sure that the flat portion on the
rocker arm shaft faces in the direction shown
in the drawing.
|
![](../../../img/11/AK300008AB00ENG.png)
|
Use the special tool camshaft oil
seal installer (MD998713) to drive each oil seal into
position in the cylinder head.
|