REMOVAL AND INSTALLATION

			Removal steps
<<A>>	>>A<<	1.	Flywheel bolt
		2.	Flywheel
		3.	Rear plate
		4.	Bell housing cover

REMOVAL SERVICE POINT

<<A>> FLYWHEEL BOLT REMOVAL

1.Use special tool flywheel stopper (MB991883) to secure the flywheel assembly.
2.Remove the flywheel bolts.

INSTALLATION SERVICE POINTS

>>A<< FLYWHEEL BOLT INSTALLATION

1.Use special tool flywheel stopper (MB991883) to secure the flywheel assembly in the same manner as removal.
2.Tighten the flywheel bolts to the specified torque.
Tightening torque: 133 ± 4 N·m