|
1.Remove the oil drain plug
to drain engine oil (Refer to ).
|
![](../../../img/12/AC904112AC00ENG.png)
|
2.Use special tool oil
filter wrench (MB991396, MB991828) or commercially-available
tool
to remove the oil filter. 3.Clean the oil filter
installing surface on the cylinder block side.
|
![](../../../img/12/AC904113AC00ENG.png)
|
4.Apply a small amount of
engine oil to the new oil filter gasket. 5.For the
specified tightening torque, refer to the caution label
attached on the oil
filter. 6.Tighten the oil filter until the gasket
contacts with the installation surface. 7.In the
same manner as removal, use special tool oil filter wrench
(MB991396, MB991828)
or commercially-available tool to tighten the oil filter to
the specified torque. 8.Install the oil drain plug
and refill the engine oil (Refer to ). 9.Rev
the engine a few times, and check to be sure that no engine
oil leaks from the
installation section of the oil filter.
|
|
1.Remove the oil drain plug
to drain engine oil (Refer to ).
|
![](../../../img/12/AC904112AB00ENG.png)
|
2.Use special tool oil
filter wrench (MB991396) or commercially-available tool to
remove
the oil filter. 3.Clean the oil filter installing
surface on the cylinder block side.
|
![](../../../img/12/AC904113AC00ENG.png)
|
4.Apply a small amount of
engine oil to the new oil filter gasket. 5.For the
specified tightening torque, refer to the caution label
attached on the oil
filter. 6.Tighten the oil filter until the gasket
contacts with the installation surface. 7.In the
same manner as removal, use special tool oil filter wrench
(MB991396) or commercially-available
tool to tighten the oil filter to the specified
torque. 8.Install the oil drain plug and refill
the engine oil (Refer to ). 9.Rev
the engine a few times, and check to be sure that no engine
oil leaks from the
installation section of the oil filter.
|