|
1.Remove the glove box
(Refer to GROUP 52A - Instrument Panel ).
|
![](../../../img/13/ACE01770AB00ENG.png)
|
2.Remove the fuel pump relay
in the junction block. 3.Crank the engine for at
least two seconds. 4.If the engine is not started,
turn the ignition switch to the "LOCK" (OFF)
position. 5.If the engine is started, turn the
ignition switch to the "LOCK" (OFF) position after the
engine stopped. 6.Install the fuel pump
relay. 7.Install the glove box (Refer to GROUP 52A
- Instrument Panel ). 8.Connect
the M.U.T.-III and read the diagnosis code. When the
diagnosis code is set, delete the diagnosis code using the
M.U.T.-III. (Refer to GROUP 00 - How To Use
Troubleshooting/Inspection Service Points, Diagnosis
Function ).
|