|
1.Disconnect the
electronic-controlled throttle valve connector.
|
|
2.Remove the air intake hose
from the throttle body.
|
|
3.Remove the throttle body
assembly.
caution |
Do not spray the cleaning
fluid directly to the throttle valve.
|
|
|
4.Spray the cleaning fluid
on a clean cloth.
caution |
- Also make sure it does not enter the
sensor through the shaft.
- Do not remove molybdenum. which is
applied around the throttle valve of the
throttle body.
|
|
![](../../../img/13/AKC00199AC00ENG.png)
|
5.Wipe off the dirt around
the throttle valve with the cloth sprayed with cleaning
fluid. 6.Install the throttle body
assembly. 7.Install the air intake
hose. 8.Connect the electronic-controlled throttle
valve connector.
|