![](../../../img/13/ACE01811AB00ENG.png)
|
2.Raise the retainer, and
pull out the fuel high-pressure hose.
note |
If the retainer comes off,
install it securely after pulling out the fuel
high-pressure hose.
|
|
![](../../../img/13/AC508217AB00ENG.png)
|
1.Apply a small amount of
new engine oil to the O-ring. 2.While turning the
fuel injector to the right and left, install the O-ring to
the fuel injector with care not to damage the
O-ring.
|
|
1.
caution |
Do not let the engine oil get
into the fuel delivery pipe will be
damaged.
|
Apply a drop of new engine oil to the
O-ring.
|
|
2.Turn the fuel injector
assembly to the right and left to install to the fuel
delivery pipe. Be careful not to damage the O-ring. After
installing, check that the item turns smoothly.
|
|
3.If it does not turn
smoothly, the O-ring may be trapped, remove the fuel
injector assembly, re-install it into the fuel delivery pipe
and check again.
|
![](../../../img/13/AC508218AB00ENG.png)
|
4.Install the fuel injector
assembly so that the protrusion of the fuel injector is
located at the centre of the fuel delivery pipe.
|
![](../../../img/13/AC508220AB00ENG.png)
|
Install the fuel injector support
to the fuel injector groove and fuel delivery pipe brim, and
fix the fuel injector assembly and fuel delivery
pipe.
|
|
1.
caution |
Do not let the engine oil get
into the engine will be damaged.
|
Apply a small amount of new engine oil to the O-ring
at the tip of the fuel injector assembly.
|
|
2.
caution |
When installing the fuel
delivery pipe and fuel injector assembly to
intake manifold, take care not to damage the
O-ring at the tip of the fuel injector
assembly.
|
Install the fuel delivery pipe and fuel injector
assembly to intake manifold. Be careful not to damage the
O-ring.
|
|
3.Tighten the fuel delivery
pipe mounting bolts to the specified
torque. Tightening torque: 11 ± 1
N·m
|
![](../../../img/13/AC208465AE00ENG.png)
|
caution |
- After connecting the fuel high-pressure
hose, check that it has been securely
installed by slightly pulling in the
removal direction. At this time, also
check that there is approximately 3-mm
play.
- Do not let the engine oil get into the
fuel delivery pipe will be
damaged.
|
Apply a small amount of new engine oil to the fuel
delivery pipe, and install the fuel high-pressure hose to
the fuel delivery pipe.
|