|
- Refer to Data List Reference Table
.
- Item 63: Rail pressure sensor
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Disconnect connector, and measure at harness side.
- Resistance between terminal engine-ECU FPS line and body earth.
|
|
Q.
Is the check result normal?
|
|
- Check output line for short circuit.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Disconnect connector, and measure at sensor side.
- With the special tool test harness (MB991658) bridge only the mating terminals of engine-ECU FPS5 line and engine-ECU FPSE line of the disconnected connector.
- Ignition switch: "ON"
- Voltage between terminal engine-ECU FPS line and body earth.
|
|
Q.
Is the check result normal?
|
|
Replace the rail pressure sensor.
|
|
|
|
- Refer to Data List Reference Table
.
- Item 63: Rail pressure sensor
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|