|
- Item 36: Variable geometry control solenoid valve
|
|
OK: The variable geometry actuator is operated
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Disconnect connector, and measure at solenoid valve side.
- Resistance between terminals.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or replace the variable geometry control solenoid valve.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: "ON"
- Voltage between terminal power supply line and body earth.
|
|
Q.
Is the check result normal?
|
|
![](../../../buttons/03btn002.png)
Repair or replace the connector, or check and repair harness between variable geometry control solenoid valve connector terminal and engine control relay connector terminal.
- Check power supply line open/short circuit
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: "ON"
- Voltage between terminal VGT and body earth.
|
|
Q.
Is the check result normal?
|
|
![](../../../buttons/03btn002.png)
Repair or replace the connector, or check and repair harness between variable geometry control solenoid valve connector terminal and engine-ECU connector terminal VGT.
- Check output line for open/short circuit.
|
|
|
|
- Check output line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Check power supply line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Item 36: Variable geometry control solenoid valve
|
|
OK: The variable geometry actuator is operated
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|