![](../../../img/14/ACX01844AC00ENG.png)
|
1.
warning |
When pressure testing the
cooling system, slowly release cooling system
pressure to avoid getting burned by hot
coolant.
|
caution |
- Be sure to completely clean away any
moisture from the places
checked.
- When the tester is taken out, be careful
not to spill any coolant.
- Be careful when installing and removing
the tester and when testing not to
deform the filler neck of the
radiator.
|
Check that the coolant level is up to the filler
neck. Install a radiator tester and apply 160 kPa pressure,
and then check for leakage from the radiator hose or
connections. 2.If there is leakage, repair or
replace the appropriate part.
|