![](../../../img/15/AK403495AA00ENG.png)
|
1.Connect a manual pump
(pressure-application type) to nipple.
caution |
In order to avoid damage to
the diaphragm, do not apply a pressure of 159
kPa or higher.
|
2.While gradually applying pressure, check
the pressure that begins to activate (approximately 1 mm
stroke) the waste gate actuator rod. Standard
value: 127.1 - 139.7 kPa 3.If there
is a significant deviation from the standard value, check
the actuator or the waste gate valve: replace actuator or
turbocharger assembly if necessary.
|