REMOVAL AND INSTALLATION <6B3>


Pre-removal Operation
  • Under Skid Plate and Engine Room Under Cover Removal.
  • Front Catalytic Converter Removal (Refer to ) <Except Euro2>.
  • Exhaust Front Pipe Removal (Refer to ) <Euro2>.

 Post-installation Operation
  • Front Catalytic Converter Installation (Refer to ) <Except Euro2>.
  • Exhaust Front Pipe Installation (Refer to ) <Euro2>.
  • Under Skid Plate and Engine Room Under Cover Installation.




Exhaust manifold, left removal steps


·
 Battery and battery box


·
 Fuel high-pressure hose connection


·
 A/T oil level gauge assembly and engine hanger


·
 Steering column support bracket
<<A>>
1.
 Left bank oxygen sensor (Front) <Except Euro2>


2.
 Harness bracket <Except Euro2>


3.
 Exhaust manifold cover, left


4.
 Exhaust manifold, left

>>B<<
 5.
 Exhaust manifold gasket







Exhaust manifold, right removal steps


·
 Air cleaner assembly (Refer to )


6.
 Exhaust manifold cover, right


7.
 Exhaust manifold, right

>>A<<
 8.
 Exhaust manifold gasket

REMOVAL SERVICE POINT


<<A>> OXYGEN SENSOR REMOVAL
1.Remove the oxygen sensor connector connection, connector bracket and harness bracket.

2.Use special tool oxygen sensor wrench (MB991953) to remove the oxygen sensor.

INSTALLATION SERVICE POINTS

>>A<< EXHAUST MANIFOLD GASKET INSTALLATION

Install the exhaust manifold gasket so that the identification hole is positioned as shown in the illustration.

>>B<< EXHAUST MANIFOLD GASKET INSTALLATION

Install the exhaust manifold gasket so that the identification hole is positioned as shown in the illustration.