REMOVAL AND INSTALLATION <4D5>


caution When the specified alternator is not used, each ECU would probably fail.
Pre-removal Operation
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner ).
  • Intercooler Air Hose Removal (Refer to GROUP 15 - Intercooler ).
  • Alternator and Power Steering Oil Pump Drive Belt Removal (Refer to GROUP 11G - Crankshaft Pulley ).

 Post-installation Operation
  • Alternator and Power Steering Oil Pump Drive Belt Installation (Refer to GROUP 11G - Crankshaft Pulley ).
  • Intercooler Air Hose Installation (Refer to GROUP 15 - Intercooler ).
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner ).




Removal
<<A>>
1.
 Alternator assembly

REMOVAL SERVICE POINT

<<A>> ALTERNATOR ASSEMBLY REMOVAL

1.Remove the rubber shield from the wheelhouse (RH), and put the wiring harness, pipe, hose, etc. to side so that they will not be a hindrance when removing and installing the alternator assembly.
2.Remove the alternator assembly from the wheelhouse (RH).