|
1.Disconnect the glow plug
relay connector (Refer to ).
|
![](../../../img/16/AK403881AB00ENG.png)
|
2.Measure resistance between
terminal C and terminal E. Standard value: 18
- 22 Ω (at
20°C) 3.
caution |
- Always be sure to disconnect the
harnesses connected to glow plug relay
terminals B and G before using the
jumper cable.
- The terminals of the disconnected
harnesses must not be shorted to
earth.
- When connecting the jumper cable, be
very careful not to make a mistake in
connecting the terminal, as this will
cause damage to the relay.
|
Use jumper cables to connect terminal C of the glow
plug relay to the battery (+) terminal and terminal E
to the battery (-) terminal. 4.Check the
continuity between glow plug relay terminals B and G while
disconnecting and connecting the jumper cable at the battery
(+) terminal.
|
Jumper cable at
battery (+)
terminal
|
Continuity between
terminals B -
G
|
Connected
|
Continuity (0.01
Ω or less)
|
Disconnected
|
No continuity
(infinite resistance)
|
|
|