REMOVAL AND INSTALLATION

caution

Never remove the accelerator pedal cover and connector. If the accelerator pedal cover removed, the accelerator pedal position sensor does not work normally.

Pre-removal and Post-installation OperationInstrument Panel Under Cover Removal and Installation (Refer to GROUP 52A - Instrument Lower Panel

		Removal steps
	1.	Accelerator pedal position sensor connector connection
	2.	Accelerator pedal module
>>A<<	3.	Accelerator pedal arm stopper

INSTALLATION SERVICE POINT

>>A<< ACCELERATOR PEDAL ARM STOPPER INSTALLATION

1.Insert the accelerator pedal arm stopper straight into the stud bolt of the body.
Shall not insert the dash pad between stopper and body panel.

2.Install the accelerator pedal arm stopper securely by turning it clockwise until its underside contacts with the body panel.

3.After the installation, slightly pull the accelerator pedal arm stopper by hand to check that it cannot be removed easily (appropriate holding power: 100N or more).