|
Using M.U.T.-III, perform CAN bus diagnosis (Refer to GROUP 54C - Explanation About The M.U.T.-III Can Bus Diagnostics ).
|
|
Q.
Is the check result satisfactory?
|
|
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting, Can Bus Diagnostic Table ). Then go to Step 4.
|
|
|
|
Using M.U.T.-III, check the data list (Refer to data list reference table ).
|
|
- Item 134: Normally closed brake switch (for cruise control circuit)
- Item 135: Brake lamp switch (for stop lamp circuit)
|
|
Q.
Is the check result normal?
|
|
Check the stop lamp switch system (Refer to - Diagnosis Code Procedures, Code No. P1571: Malfunction of the stop lamp switch system). Then go to Step 4.
|
|
|
|
Q.
When the brake pedal is depressed, is the cruise control cancelled?
|
|
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction ).
|
|
|
|
Replace the engine-ECU (Refer to GROUP 13C - Engine-ECU ). Then go to Step 4.
|
|
|
|
Q.
When the brake pedal is depressed, is the cruise control cancelled?
|
|
The procedure is complete.
|
|
|