Code No. C1752: ACC/FCM Radar TEMP. Out of Range



caution When the ACC/FCM-ECU is replaced, calibrate the radar (refer to ).

OPERATION


The ACC/FCM-ECU monitors temperature at the radar.

DIAGNOSIS CODE SET CONDITION


This diagnosis code is set when the abnormality below is detected:


PROBABLE CAUSES




DIAGNOSIS PROCEDURE


STEP 1. Check the radar temperature (high or low).


(1)Turn the ignition switch to "LOCK" (OFF) position and then wait for a while so that the radar at the ACC/FCM-ECU remains at appropriate temperature.
(2)Erase the diagnosis code.
(3)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
(4)Start the engine.
(5)Press the ACC ON/OFF switch to turn the ACC system to ON.
(6)On completion, check that the diagnosis code is set again.

Q. Is diagnosis code No. C1752 set?

Go to Step 2.
This diagnosis is complete (Protection is deactivated).

STEP 2. M.U.T.-III data list.


Check the following data list (Refer to ).

  • Item No. 2: RADAR temperature

Q. Is the check result normal?

Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction).
Replace the ACC/FCM-ECU (Refer to ).