Code No. C2268:
Distance Travelled Signal Fail
| caution |
- If there is any
problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis,
diagnose the CAN bus lines (Refer to GROUP 54C - Troubleshooting
 ).
- Whenever the ECU is replaced, ensure that the CAN bus lines are normal.
- When the ACC/FCM-ECU is replaced, calibrate the radar (refer to ).
|
OPERATION
The ACC/FCM-ECU receives mileage signal from the ASTC-ECU.
DIAGNOSIS CODE SET CONDITION
The ACC/FCM-ECU sets the diagnosis code when it receives an invalid mileage signal
from the ASTC-ECU.
| note |
A diagnosis code is not set as a historic fault.
|
PROBABLE CAUSES
- Malfunction of the CAN bus line
- ASTC system fault (mileage signal fault)
- Malfunction of the ACC/FCM-ECU
|
|
STEP 1. M.U.T.-III CAN bus diagnostics.
|
|
|
Use M.U.T.-III to perform the CAN bus diagnosis.
|
|
|
Q.
Is the check result normal?
|
|
|
 Go to Step 2.
|
|
|
|
|
|
 Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting ).
On completion, go to Step 2.
|
|
|
|
|
|
STEP 2. Use M.U.T.-III to confirm a diagnosis code of other systems.
|
|
|
Check if the diagnosis code is set in the ASTC-ECU (Refer to GROUP 35C - Troubleshooting <ASTC-ECU>, Diagnosis
Function).
|
|
|
Q.
Is the diagnosis code set?
|
|
|
Troubleshoot the ASTC-ECU diagnosis code (Refer to GROUP 35C - Troubleshooting <ASTC-ECU>,
Diagnosis Code Chart ).
|
|
|
|
|
|
Go to Step 3.
|
|
|
|
|
|
STEP 3. Check whether the diagnosis code is set again.
|
|
|
Check again if the diagnosis code is set in the ACC/FCM-ECU.
|
|
|
(1)Erase the diagnosis code.
|
|
|
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
|
|
|
(4)Press the ACC ON/OFF switch to turn the ACC system to ON.
|
|
|
(5)On completion, check that the diagnosis code is set again.
|
|
|
Q.
Is diagnosis code No. C2268 set?
|
|
|
Replace the ACC/FCM-ECU (Refer to ).
|
|
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction).
|
|
|
|