|
1.Remove the ventilation
hose from the PCV valve.
|
|
2.Remove the PCV valve from
the rocker cover.
|
|
3.Reinstall the PCV valve at
the ventilation hose.
|
|
4.Start the engine and run
at idle.
|
![](../../../img/17/AKX00336AD00ENG.png)
|
5.Place a finger at the
opening of the PCV valve and check that vacuum of the inlet
manifold is felt.
note |
At this moment, the plunger in
the PCV valve moves back and forth.
|
6.If vacuum is not felt, clean the PCV valve
or replace it.
|
|
1.Remove the ventilation
hose from the PCV valve.
|
|
2.Remove the PCV valve from
the rocker cover.
|
|
3.Install the PCV valve at
the ventilation hose.
|
|
4.Start the engine and run
at idle.
|
![](../../../img/17/AK604163AD00ENG.png)
|
5.Place a finger at the
opening of the PCV valve and check that vacuum of the inlet
manifold is felt.
note |
At this moment, the plunger in
the PCV valve moves back and forth.
|
6.If vacuum is not felt, clean the PCV valve
or replace it. 7.Apply a small amount of new
engine oil to the O-ring on the PCV valve, and tighten to
the specified torque. Standard value: 2.5
± 0.4 N·m
|