1.Turn back the carpet etc.
under the clutch pedal. |
![]() |
2.Measure the clutch pedal
clevis pin play (A). If the play is outside the standard
value,
go to Step 3. Standard value (A): 1 - 3 mm 3.Remove the clutch switch and clutch interlock switch (Refer to ![]() |
![]() ![]() |
5.Check that the height (B)
as well as the clearance (C) between the clutch pedal and
stopper
when the clutch is disengaged are within the standard
value. Standard value (B):
<R.H. drive vehicles> 133.5 - 139 mm
<R.H. drive vehicles> 35 mm or more 7.Install the clutch switch and clutch interlock switch (Refer to ![]() 8.If the clutch pedal clevis pin play is not within the standard value, loosen the setting nut and move the pushrod to adjust. |
![]() ![]() |
9.After the adjustments,
confirm that the clutch pedal free play (measured at the
face of
the pedal pad) and the distance between the clutch pedal
(the face of the pedal pad) and the floorboard
when the clutch is disengaged are within the standard value
ranges. Standard value (D): 4 - 13 mm Standard value (C):
<R.H. drive vehicles> 35 mm or more 11.Reinstall the carpet, etc. |