CLUTCH SWITCH AND CLUTCH INTERLOCK SWITCH CHECK <4N1, 4D5>


CLUTCH SWITCH CONTINUITY CHECK
caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
1.Check the clutch pedal.

2.Connect an ohmmeter to the clutch switch connector, and then check for continuity when the clutch pedal is fully depressed and when it is released outward.
Terminal connector of tester
 Pedal position
 Normal condition
1-2
 Fully depressed
 No continuity
Released
 Continuity exists
(2 Ω or less)
3.If the continuity is incorrect, replace the clutch switch (Refer to ).

CLUTCH INTERLOCK SWITCH CONTINUITY CHECK
caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
1.Check the clutch pedal.

2.Connect an ohmmeter to the clutch interlock switch connector, and then check for continuity when the clutch pedal is fully depressed and when it is released outward.
Terminal connector of tester
 Pedal position
 Normal condition
1-2
 Fully depressed
 Continuity exists
(2 Ω or less)
Released
 No continuity
3.If the continuity is incorrect, replace the clutch interlock switch (Refer to ).