|
Specified fluid: Brake
fluid DOT 3 or DOT 4
|
![](../../../img/21/ACF00075AB00ENG.png)
|
1.Connect a hose with a
bottle to the bleeder screw. 2.Open the bleed
nipple. 3.Depress the clutch pedal slowly. Open
the bleeder screw to let air and brake fluid out. Close the
bleeder screw. Release the clutch pedal. Repeat until only
brake fluid and no air comes out. 4.After air
bleeding, tighten the bleeder screw to the specified
torque. Tightening torque: 8.0 ± 1.0
N·m 5.Check that the brake fluid
reservoir level stays between "MAX" and "MIN" marks
throughout the clutch bleeding process.
|