REMOVAL AND INSTALLATION


caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Pre-removal Operation
  • Clutch Master Cylinder Assembly Removal (Refer to ).

 Post-installation Operation
  • Clutch Master Cylinder Assembly Installation (Refer to ).
  • Clutch Pedal Adjustment (Refer to ).




Removal steps


1.
 Bushing


2.
 Clutch pedal assembly


3.
 Clutch interlock switch


4.
 Return spring


5.
 Pedal stopper


6.
 Pedal pad

>>A<<
 7.
 Stopper

INSTALLATION SERVICE POINT

>>A<< STOPPER INSTALLATION
1.Insert the stopper straight into the stud bolt of the body.
Shall not insert the dash pad between stopper and body panel.
2.Install the stopper securely by turning it clockwise until its underside contacts with the body panel.
3.After the installation, slightly pull the stopper by hand to check that it cannot be removed easily (appropriate holding power: 100N or more).