2.Remove the drain plug and gasket, and then drain the oil.
3.Install the drain plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32 ± 2 N·m
4.Fill with gear oil MITSUBISHI MOTORS GENUINE MTF API classification GL-3 SAE 75W-85 or MITSUBISHI MOTORS GENUINE Multi Gear Oil API classification GL-4 SAE 75W-85 until the level comes to the lower portion of filler plug hole.
Quantity: 2.3 L
5.Install the filler plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32 ± 2 N·m