REMOVAL AND INSTALLATION <R6M5A, V6M5A>

Pre-removal OperationMove the transmission control lever to the Neutral position.

Post-installation OperationCheck that the transmission control lever is moved to each position smoothly and correctly.

		Removal steps
	1.	Shift knob
>>B<<	2.	Sleeve <V6M5A>
	·	Floor console panel (Refer to GROUP 52A - Rear Floor Console Assembly.)
	3.	Lever silencer
	·	Gearshift lever panel (Refer to GROUP 52A - Front Floor Console Assembly .)
	4.	Dust cover retaining plate
	5.	Dust cover
>>A<<	6.	Transmission control lever assembly

INSTALLATION SERVICE POINT

>>A<< TRANSMISSION CONTROL LEVER ASSEMBLY INSTALLATION

1.Completely degrease the FIPG-applied surface so that water and oil including the old sealant cannot adhere to the surface coated with the sealant.
Never touch the degreased surface by hand.
2.Apply a 1.5 mm diameter bead of liquid gasket to the transmission control lever assembly surface of body.
Special sealant: ThreeBond 1216 or equivalent

>>B<< SLEEVE INSTALLATION <V6M5A>

Install the sleeve with its groove facing to the direction shown in the figure, and then install the shift knob.