DISASSEMBLY AND REASSEMBLY



Disassembly steps

>>B<<
 1.
 Shaft snap ring
<<A>>
 >>A<<
 2.
 Radial ball bearing


3.
 Synchronizer ring No.2


4.
 Needle roller bearing


5.
 Input shaft sub-assembly

DISASSEMBLY SERVICE POINT

<<A>> RADIAL BALL BEARING REMOVAL

Using special tool Bearing remover (MD998801), support the radial ball bearing and remove it.

REASSEMBLY SERVICE POINTS

>>A<< RADIAL BALL BEARING INSTALLATION

1.Check the installation direction of the radial ball bearing, and put it on the input shaft.

2.
caution Never push on the sealing area when installing.
Using special tools to install the radial ball bearing.

  • Installer cap (MD998812)
  • Installer-200 (MD998814)
  • Installer adapter (48) (MD998823)

>>B<< SNAP RING INSTALLATION

1.Select a snap ring to secure the standard clearance between the radial ball bearing and the input shaft sub-assembly.
Standard value: 0 - 0.1 mm
2.Install the selected snap ring.