DISASSEMBLY AND REASSEMBLY



Disassembly steps

>>B<<
 1.
 Snap ring
<<A>>
 >>A<<
 2.
 Bearing


3.
 Output shaft

DISASSEMBLY SERVICE POINTS

<<A>> BEARING REMOVAL
1.Use special tool remover (MD998801) to support the bearing.
2.Press the output shaft with a press and remove the bearing.

REASSEMBLY SERVICE POINTS

>>A<< BEARING INSTALLATION

1.Check the installation direction of the bearing, and put it on the output shaft.
2.Use special tools to install the bearing.

  • Installer cap (MD998812)
  • Installer-200 (MD998814)
  • Installer adapter(46) (MD998822)
3.Press the output shaft with a press and install the bearing.

>>B<< SNAP RING INSTALLATION
1.Install the thickest snap ring that can be fitted in the snap ring groove of the output shaft.
2.Make sure that the bearing end play meets the standard value.
Standard value: - 0.01 - 0.09 mm