![](../../../img/22/ACE02254AB00ENG.png)
|
1.Use special tools to
remove the ball bearing.
- Brg remover (MD998917)
- B base (MB991050)
2.Press the planetary gear assembly with a press
and remove the ball bearing.
|
![](../../../img/22/ACE02256AB00ENG.png)
|
1.Use special tool to remove
the needle roller bearing.
- Brg otr race remover (MD998346)
- Mount bush.R & I ring (MB990979)
2.Press the planetary gear assembly with a press
and remove the needle roller bearing.
|
![](../../../img/22/ACE02257AB00ENG.png)
|
1.Use special tools to
install the needle roller bearing.
- Installer bar (MB990938)
- Installer adapter (MB990931)
2.Press the planetary gear assembly with a press
and install the needle roller bearing.
|
![](../../../img/22/ACE02933AB00ENG.png)
|
1.Check the installation
direction of the ball bearing, and put it on the planetary
gear
assembly.
|
![](../../../img/22/ACE02255AB00ENG.png)
|
2.Use special tool, Arm bush
base (MB992125), install the ball bearing. 3.Press
the planetary gear assembly with a press and install the
ball bearing.
|
![](../../../img/22/ACE02965AB00ENG.png)
|
1.Install the thickest snap
ring that can be fitted in the snap ring groove of the
planetary
gear assembly. 2.Make sure that the ball bearing
axial play meets the standard value. Standard
value: 0.1 mm or less
|