DATA LIST REFERENCE TABLE


ITEM NO.
 CHECK ITEM
 INSPECTION REQUIREMENT
 NORMAL CONDITION
1
 Vehicle speed
 Driving
 Equivalent to the speed of a meter display.
2
 Wheel speed (FL)
 Driving
 Data changes by vehicle speed.
3
 Wheel speed (FR)
 Driving
 Data changes by vehicle speed.
4
 Wheel speed (RL)
 Driving
 Data changes by vehicle speed.
5
 Wheel speed (RR)
 Driving
 Data changes by vehicle speed.
6
 Front propeller shaft speed
 Driving
 Data changes by vehicle speed.
7
 Rear propeller shaft speed
 Driving
 Data changes by vehicle speed.
8
 Rear wheel acceleration
 Driving
 Data changes by vehicle speed.
9
 Power voltage
 Ignition switch: ON
 System voltage
10
 T/F position
  • Engine: Idling
  • Transmission gear position: Neutral position
  • Centre differential lock indicator lamp: Should not be flashing rapidly

 -
 Undefined
Drive mode-selector position: 2H
 2H
Drive mode-selector position: 4H
 4H
Drive mode-selector position: 4HLc
 4HLc
Drive mode-selector position: 4LLc
 4LLc
Drive mode-selector position: 2H→4HLc
 2H→4HLc
Drive mode-selector position: 4HLc→2H
 4HLc→2H
Drive mode-selector position: 4HLc→4H
 4HLc→4H
Drive mode-selector position: 4H→4HLc
 4H→4HLc
Drive mode-selector position: 4HLc→4LLc
 4HLc→4LLc
Drive mode-selector position: 4LLc→4HLc
 4LLc→4HLc
11
 Engine torque
  • Engine: Idling
  • Transmission gear position: Neutral position

 Accelerator pedal: Fully closed <=> Full open
 Data changes by operation.
12
 Engine speed
  • Engine: Idling
  • Transmission gear position: Neutral position

 Accelerator pedal: Fully closed <=> Full open
 Data changes by operation.
13
 Accelerator position
 Accelerator pedal: Fully closed
 0%
Accelerator pedal: Depressed
 Opening angle value increases in response to the depression amount of the accelerator pedal.
14
 T/F motor 1
 Transfer actuator Status
 Not operating
 OFF
Operating
 ON
15
 T/F motor 2, H/L motor 2
 Transfer actuator Status
 Not operating
 OFF
Operating
 ON
16
 T/F motor 1 relay
 Transfer actuator Status
 Not operating
 OFF
Operating
 ON
17
 T/F motor 2, H/L motor 2 relay
 Transfer actuator Status
 Not operating
 OFF
Operating
 ON
18
 H/L motor 1
 Transfer actuator Status
 Not operating
 OFF
Operating
 ON
19
 H/L motor 1 relay
 Transfer actuator Status
 Not operating
 OFF
Operating
 ON
20
 T/F motor voltage
 -
 Not inspection item
21
 T/F motor PWM output
 During transfer shifting (while motor is running)
 Data changes.
22
 T/F motor current
 During transfer shifting (while motor is running)
 MAX 12.5 A
23
 T/F select switch
 Drive mode-selector position: 2H
 2H
Drive mode-selector position: 4H
 4H
Drive mode-selector position: 4HLc
 4HLc
Drive mode-selector position: 4LLc
 4LLc
Other than the above
 Undefined
24
 Rear differential clutch voltage
 -
 Not inspection item
25
 Rear differential clutch PWM output(RW+)
 During rear differential locking (while motor is running)
 Data changes.
26
 Rear differential clutch output (RW-)
 Ignition switch: ON
 Rear differential lock status: Not operating
 OFF
Rear differential lock status: Operating
 ON
27
 Rear differential clutch current
 During rear differential locking (while motor is running)
 MAX 7 A
28
 T/F limit switch 1
    1. Drive mode-selector position: 2H
    T/F limit switch 1=ON, T/F limit switch 2=OFF, T/F limit switch 3=ON, Centre differential lock position switch=OFF
    2. Drive mode-selector position: 4HLc
    T/F limit switch 1=OFF, T/F limit switch 2=ON, T/F limit switch 3=ON, Centre differential lock position switch=ON
    3. Drive mode-selector position: 4H
    T/F limit switch 1=ON, T/F limit switch 2=ON, T/F limit switch 3=OFF, Centre differential lock position switch=OFF
    4. High/Low Status: Hi
    H/L limit switch 1=OFF, H/L limit switch 2=ON
    4. High/Low Status: Lo
    H/L limit switch 1=ON, H/L limit switch 2=OFF
29
 T/F limit switch 2
30
 T/F limit switch 3
31
 H/L limit switch 1
32
 H/L limit switch 2
33
 Center differential lock position switch
34
 T/F select switch (2H)
 Drive mode-selector position: 2H
 ON
Drive mode-selector position: Other than the above
 OFF
35
 T/F select switch (4HLc)
 Drive mode-selector position: 4HLc
 ON
Drive mode-selector position: Other than the above
 OFF
36
 T/F select switch (4LLc)
 Drive mode-selector position: 4LLc
 ON
Drive mode-selector position: Other than the above
 OFF
37
 T/F select switch (4H)
 Drive mode-selector position: 4H
 ON
Drive mode-selector position: Other than the above
 OFF
38
 Rear differential lock select SW
  • Ignition switch: ON
  • Transfer position: 4H, 4HLc or 4LLc

 Rear differential lock switch: OFF
 Unlock
Rear differential lock switch: ON
 Lock
No equipment
 Not present
39
 Rear differential lock select SW (Lock)
 Ignition switch: ON
 Rear differential lock switch (Lock): OFF
 OFF
Rear differential lock switch (Lock): ON
 ON
No equipment
 Not present
40
 Rear differential lock select SW (Free)
 Ignition switch: ON
 Rear differential lock switch (Free): OFF
 OFF
Rear differential lock switch (Free): ON
 ON
No equipment
 Not present
41
 Rear differential lock position switch
  • Ignition switch: ON
  • Transfer position: 4WD

 Rear differential lock switch: OFF
 Unlock
Rear differential lock switch: ON
 Lock
No equipment
 Not present
42
 Ignition switch
 Ignition switch: OFF
 OFF
Ignition switch: ON
 ON
43
 F/W voltage
 -
 Not inspection item
44
 F/W position switch
 Ignition switch: ON
 Freewheel position status: Disengage
 Disengage
Freewheel position status: Engage
 Engage
No equipment
 Not present
45
 F/W solenoid output (+)
 Ignition switch: ON
 Freewheel position status: Engage
 OFF
Freewheel position status: Disengage
 ON
46
 F/W solenoid output (-)
 Ignition switch: ON
 Freewheel position status: Engage
 OFF
Freewheel position status: Disengage
 ON
47
 F/W IPD status
 Ignition switch: ON
 Freewheel position status: Engage
 OFF
Freewheel position status: Disengage
 ON
49
 ABS/A.S.C. operation status
 Ignition switch: ON
 ABS/A.S.C. operation status: Not operating
 Not operating
ABS/A.S.C. operation status: Operating
 Operating
51
 A/T neutral status
 Selector lever position: N
 Neutral
Selector lever position: Other than the above
 Not neutral
MT vehicle
 Not set
53
 AWC system fail warning lamp
 Ignition switch: ON
 Normal
 OFF
Abnormal
 ON
54
 Rear differential lock fail warning lamp
 Ignition switch: ON
 Normal
 OFF
Abnormal
 ON
55
 Indicator (Front tyre)
 Ignition switch: ON
 Not operating
 Not flashing
Transfer operating
 Flashing
56
 Indicator (Rear tyre)
 Ignition switch: ON
 Not operating
 Not flashing
High/Low operating
 Flashing
57
 Indicator (Center differential lock)
 Ignition switch: ON
 Not operating
 Not flashing
Centre differential lock operating
 Flashing
58
 Indicator (Low gear)
 Ignition switch: ON
 Not operating
 Not flashing
High/Low operating in driving
 Flashing
59
 Indicator (Rear differential lock)
 Ignition switch: ON
 Not operating
 Not flashing
Rear differential lock operating
 Flashing
60
 Self holding output
 Ignition switch: ON
 OFF
Ignition switch: OFF
 ON
61
 VCC voltage monitor 1
 -
 Not inspection item
62
 VCC voltage monitor 2
 -
 Not inspection item
63
 T/F motor monitor voltage
 -
 Not inspection item
64
 T/F motor monitor voltage offset
 -
 Not inspection item
65
 Rear differential clutch monitor voltage
 -
 Not inspection item
66
 R/D clutch monitor volt. offset
 -
 Not inspection item
67
 ROM fail flag
 Ignition switch: ON
 Normal
 OFF
Abnormal
 ON
68
 RAM fail flag
 Ignition switch: ON
 Normal
 OFF
Abnormal
 ON
69
 Meter display (T/F select switch)
 Drive mode-selector position: 2H
 2H
Drive mode-selector position: 4H
 4H
Drive mode-selector position: 4HLc
 4HLc
Drive mode-selector position: 4LLc
 4LLc
Other than the above
 Undefined
70
 Meter display (T/F select switch flash)
 Ignition switch: ON
 Normal
 OFF
The transfer is being switched.
 ON
71
 Meter display (AWC system fail)
 Ignition switch: ON
 Normal
 OFF
Abnormal
 ON
72
 Meter display (H/L select fail)
 Ignition switch: ON
 Normal
 OFF
Abnormal
 ON
73
 Meter display (Interrupt T/F select)
 Ignition switch: ON
 Normal
 OFF
The drive mode-selector is rotated.
 ON
74
 Meter display (Re-interrupt T/F select)
 Ignition switch: ON
 Normal
 OFF
The drive mode-selector is rotated while the transfer is being switched
 ON
75
 Meter display (N range operation request)
 Ignition switch: ON
 Normal
 OFF
The system requests the driver to move the A/T selector lever to the N range when the transfer is switched
 ON
76
 Meter display (Clutch operation request) <M/T>
 Ignition switch: ON
 Normal
 OFF
The system requests the driver to depress the clutch pedal when the transfer is switched.
 ON (On A/T, it remains OFF)
77
 Meter display (Inhibited rear differential lock switch)
 Ignition switch: ON
 Normal
 OFF
The system requests the display to show that the rear differential lock is disabled.
 ON
78
 Buzzer (Inhibited rear differential lock switch)
 Ignition switch: ON
 Normal
 OFF
The system requests the buzzer to sound to inform that the rear differential lock is disabled.
 ON
79
 A/T input shaft control status
 Ignition switch: ON
 Normal
 Not active
Interlock at the automatic transmission is being activated.
 Active
Interlock at the automatic transmission is ready to activate.
 Ready
Interlock at the automatic transmission fails.
 Fail
80
 T/F 4H/L select request
 Ignition switch: ON
 Normal
 Not request
Interlock control is requested
 Request
81
 H/L select control status
 Ignition switch: ON
 Not operating
 Not operating mode mode
The system switches the transfer between High/Low.
 Normal mode
The system attempts to switch the transfer between High/Low.
 Retry mode
Switching the transfer between High/Low is disabled
 Prohibit mode
The system switches the transfer between High/Low.
 Normal mode (switching disabled)
The system switches the transfer between High/Low.
 Normal mode (The system selects High or Low actively when the transfer is in neutral)
The system switches the transfer between High/Low.
 Normal mode (The system switches the transfer between High/low actively as an exceptional measure)
Switching the transfer between High/Low is aborted
 Stop mode
82
 A/T output shaft speed
 Driving
 Data changes by vehicle speed