![]() |
1.Remove the front heat
protector from the transmission case. 2.Move the selector lever to the N position. |
![]() |
6.Gently push the
transmission control cable lever in the direction as shown,
and tighten the adjusting nut to the specified
torque. Tightening torque: 23 ± 4 N·m 7.Check that the selector lever is at the N position. 8.Check that the transmission shifts to the correct range corresponding to the position of the selector lever, and that it functions correctly in that range. 9.Install the front heat protector to the transmission case. Tightening torque: 11 ± 1 N·m |